Dupont Tyvek Xpert 500 Coveralls

Dupont Tyvek Xpert 500 Coveralls

$16.50 inc GST

Disposable Chemical Protection Coverall Tyvek 500 Xpert, Type 5/6. Category III.

Chemical protective clothing ideal for spraying chemicals where direct pressurised spray or prolonged exposure to direct spray will not occur.

Dupont Tyvek 500 Xpert is the leading market standard for protection in this category.

A semi-breathable material (suitable for hot environments), providing operator comfort and protection against airborne particles and liquid chemical splash.

If prolonged exposure to direct chemical spray is likely to occur, the Dupont Tychem 2000 suit is recommended (non-breathable, Type 3, 4, 5 & 6).

Sizes Available: S, M, L, XL, XXL, XXXL – refer to sizing chart below for guidance.

SKU: N/A Categories: ,

Description

  • Hooded Coverall.
  • Ergonomic-Protective Design.
  • Stitched External Seams.
  • Elasticated Wrist, Ankles and Face.
  • Elasticated Waist (glued in).
  • Tyvek Zipper and Flap.
  • White.
  • Antistatic treatment on both sides (EN 1149-5).
  • Type 5-B: Protection against airborne particles (EN ISO 13982-1:2004 + A1:2010
  • Type 6-B: Protection against liquid chemical splash (EN 13034:2005 + A1:2009
  • Tyvek 400 not recommended due to only providing frontal exposure (back panel is non-woven).

 

Type 5: Protection against Airborne Particles

Type 5 coverall suits protect the wearer against dust and dry particles. Type 5 coveralls are tested by having a subject perform exercise on a treadmill while a spray cabin is filled with dust. Particle counters inside the suit then calculate the inward leakage (the amount of dust that enters the suit). They are suitable for industrial cleaning, site preparation and handling insulation. They are also suitable for asbestos and silica protection. When dealing with hazardous materials such as asbestos and silica dust, it is important that workers have completed risk assessments and are wearing the correct clothing to avoid the risk of contamination.

 

Type 6: Protection against Liquid Chemical Splash

Type 6 coveralls protect the wearer against light spray and splashes. They are similar to Type 3 and Type 4 suits however they are tested with a light spray of liquid which is not permitted to build up on the suit. In this instance, the subject rotates on a turntable as four nozzles spray liquid onto the suit and afterwards the inside of the suit is checked for any penetration. Dependent on the testing criteria and the amount of liquid inside the suit, it will be classed as a pass or a fail. They offer the lowest level of protection and should only be worn in low risk environments.

 

https://www.jkross.co.uk/netalogue/pdfs/Dupont%20Sizing%20Chart.jpg

 

Additional information

Select Size:

Small, Medium, Large, XL, XXL, XXXL

You may also like…

Go to Top